1.카본에 흰 반점이나 핀홀이 있는 경우: 잉크가 고르게 퍼지지 않아 발생합니다. 이러한 리본은 인쇄할 때 불완전한 단어를 유발할 수 있습니다. 열등한 왁스{1}} 리본에는 가루가 떨어집니다.
2. The ribbon is wrinkled, this is due to the problem of the tension control system during slitting. The melting temperature of the two layers of ribbons is much higher than that of the first layer, which will result in a small area on the ribbon without words when printing.
3. The winding of the ribbon is too tight or too loose during processing, so that the ribbon cannot be matched with the printer when it is running.
4. Carbon with blanks: Because the light film is not treated well, it will cause incomplete blanks.
5. The inner diameter of the paper core is quite different from that of the printer shaft: causing the ribbon to not be loaded into the printer or the shaft to take up the ribbon.
6. The temperature is too high during transportation, which will cause the ribbons to stick together.
7. The ribbon is not long enough.
